|
You can restrict the patterns shown in the Results Sheet to a certain filtered set. Filters are useful to generate partial reports and totals.
Important: In both reports and Cutting Patterns Sheet only the filtered patterns are to be shown.
To filter the patterns in the solution:
1. In the Results Sheet, click in the column to filter by. 2. In the Filter by... box, type a list of values or ranges separated by comma. For example: 3,5,10-15,34-50 3. From the Edit menu, select Apply filter
Only the patterns within the filtered list will be showed.
Important: When filtering by material use the index values, not the dimensions.
Tip: You can filter columns that indicate quantities (Repetition, P1, P2, ...) by defining a range from 1 to a large value being greater than the maximum value in the column. For example, to see “only the patterns that distributes the part #1” , apply the filter “1-1000” to column P1 provided no patterns distributes P1 more than 1000 times. To get the maximum of a column, you can sort it descending and then look at the value in the first row. |
|
Corte 3 Professional Edition Copyright © 2003-2005 Neginter del Caribe Ltd. All rights reserved |
|
4.3 |
|
Analyzing Results |
|
4 |
|
Filtering the Patterns |
